在服务器端安装完apache后的问题

原服务器端已装iis占用了80端口，安装完apache后修改apache端口为8080



指定域名后在服务器端可以通过http://ip地址：8080和http://域名:8080访问默认设置，但是我在客户端访问服务器通过域名和网址都无法访问





以下为我的httpd.conf



### Section 1: Global Environment

#

# The directives in this section affect the overall operation of Apache,

# such as the number of concurrent requests it can handle or where it

# can find its configuration files.

#



#

# ServerType is either inetd, or standalone. Inetd mode is only supported on

# Unix platforms.

#

ServerType standalone



#

# ServerRoot: The top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

ServerRoot "/usr/local/apache"



#

# PidFile: The file in which the server should record its process

# identification number when it starts.

#

PidFile logs/httpd.pid



#

# ScoreBoardFile: File used to store internal server process information.

# Not all architectures require this. But if yours does (you'll know because

# this file will be created when you run Apache) then you *must* ensure that

# no two invocations of Apache share the same scoreboard file.

#

ScoreBoardFile logs/apache_runtime_status



#

# In the standard configuration, the server will process httpd.conf (this

# file, specified by the -f command line option), srm.conf, and access.conf

# in that order. The latter two files are now distributed empty, as it is

# recommended that all directives be kept in a single file for simplicity.

# The commented-out values below are the built-in defaults. You can have the

# server ignore these files altogether by using "/dev/null" (for Unix) or

# "nul" (for Win32) for the arguments to the directives.

#

#ResourceConfig conf/srm.conf

#AccessConfig conf/access.conf



#

# Timeout: The number of seconds before receives and sends time out.

#

Timeout 300



#

# KeepAlive: Whether or not to allow persistent connections (more than

# one request per connection). Set to "Off" to deactivate.

#

KeepAlive On



#

# MaxKeepAliveRequests: The maximum number of requests to allow

# during a persistent connection. Set to 0 to allow an unlimited amount.

# We recommend you leave this number high, for maximum performance.

#

MaxKeepAliveRequests 0



#

# KeepAliveTimeout: Number of seconds to wait for the next request from the

# same client on the same connection.

#

KeepAliveTimeout 20



#

# Apache on Win32 always creates one child process to handle requests. If it

# dies, another child process is created automatically. Within the child

# process multiple threads handle incoming requests. The next two

# directives control the behaviour of the threads and processes.

#



#

# MaxRequestsPerChild: the number of requests each child process is

# allowed to process before the child dies. The child will exit so

# as to avoid problems after prolonged use when Apache (and maybe the

# libraries it uses) leak memory or other resources. On most systems, this

# isn't really needed, but a few (such as Solaris) do have notable leaks

# in the libraries. For Win32, set this value to zero (unlimited)

# unless advised otherwise.

#

# NOTE: This value does not include keepalive requests after the initial

# request per connection. For example, if a child process handles

# an initial request and 10 subsequent "keptalive" requests, it

# would only count as 1 request towards this limit.

#

MaxRequestsPerChild 0



#

# Number of concurrent threads (i.e., requests) the server will allow.

# Set this value according to the responsiveness of the server (more

# requests active at once means they're all handled more slowly) and

# the amount of system resources you'll allow the server to consume.

#

ThreadsPerChild 50



#

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, instead of the default. See also the

# directive.

#

#Listen 3000

Listen ip地址:8080



#

# BindAddress: You can support virtual hosts with this option. This directive

# is used to tell the server which IP address to listen to. It can either

# contain "*", an IP address, or a fully qualified Internet domain name.

# See also the and Listen directives.

#

#BindAddress *



#

# Dynamic Shared Object (DSO) Support

#

# To be able to use the functionality of a module which was built as a DSO you

# have to place corresponding `LoadModule' lines at this location so the

# directives contained in it are actually available _before_ they are used.

# Please read the file README.DSO in the Apache 1.3 distribution for more

# details about the DSO mechanism and run `apache -l' for the list of already

# built-in (statically linked and thus always available) modules in your Apache

# binary.

#

# Note: The order in which modules are loaded is important. Don't change

# the order below without expert advice.

#

# Example:

# LoadModule foo_module modules/mod_foo.so

#

#LoadModule vhost_alias_module modules/mod_vhost_alias.so

#LoadModule mime_magic_module modules/mod_mime_magic.so

LoadModule status_module modules/mod_status.so

LoadModule info_module modules/mod_info.so

#LoadModule speling_module modules/mod_speling.so

LoadModule rewrite_module modules/mod_rewrite.so

#LoadModule anon_auth_module modules/mod_auth_anon.so

#LoadModule dbm_auth_module modules/mod_auth_dbm.so

#LoadModule digest_auth_module modules/mod_auth_digest.so

#LoadModule digest_module modules/mod_digest.so

#LoadModule proxy_module modules/mod_proxy.so

#LoadModule cern_meta_module modules/mod_cern_meta.so

#LoadModule expires_module modules/mod_expires.so

#LoadModule headers_module modules/mod_headers.so

#LoadModule usertrack_module modules/mod_usertrack.so

#LoadModule unique_id_module modules/mod_unique_id.so



LoadModule php4_module modules/php4apache.dll



LoadModule gzip_module modules/ApacheModuleGzip.dll





#

# Reconstruction of the complete module list from all available modules

# (static and shared ones) to achieve correct module execution order.

#

# The modules listed below, without a corresponding LoadModule directive,

# are static bound into the standard Apache binary distribution for Windows.

#

# Note: The order in which modules are loaded is important. Don't change

# the order below without expert advice.

#

# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE, UPDATE THIS TOO!]

ClearModuleList

#AddModule mod_vhost_alias.c

AddModule mod_env.c

AddModule mod_log_config.c

#AddModule mod_mime_magic.c

AddModule mod_mime.c

AddModule mod_negotiation.c

AddModule mod_status.c

AddModule mod_info.c

AddModule mod_include.c

AddModule mod_autoindex.c

AddModule mod_dir.c

AddModule mod_isapi.c

AddModule mod_cgi.c

AddModule mod_asis.c

AddModule mod_imap.c

AddModule mod_actions.c

#AddModule mod_speling.c

AddModule mod_userdir.c

AddModule mod_alias.c

AddModule mod_rewrite.c

AddModule mod_access.c

AddModule mod_auth.c

#AddModule mod_auth_anon.c

#AddModule mod_auth_dbm.c

#AddModule mod_auth_digest.c

#AddModule mod_digest.c

#AddModule mod_proxy.c

#AddModule mod_cern_meta.c

#AddModule mod_expires.c

#AddModule mod_headers.c

#AddModule mod_usertrack.c

#AddModule mod_unique_id.c

AddModule mod_php4.c

AddModule mod_so.c

AddModule mod_setenvif.c



AddModule mod_gzip.c





mod_gzip_on Yes

mod_gzip_update_static No

mod_gzip_temp_dir /usr/local/apache/temp

mod_gzip_keep_workfiles No

mod_gzip_minimum_file_size 100

mod_gzip_maximum_file_size 0

mod_gzip_maximum_inmem_size 1000000

mod_gzip_min_http 1000

mod_gzip_handle_methods GET POST

mod_gzip_item_exclude reqheader "User-agent: Mozilla/4.0[678]"

mod_gzip_item_include file \.html$

mod_gzip_item_include file \.htm$

mod_gzip_item_include file \.shtml$

mod_gzip_item_include file \.shtm$

mod_gzip_item_include file \.pl$

mod_gzip_item_include file \.cgi$

mod_gzip_item_include mime ^text/.*

mod_gzip_item_include handler ^perl-script$

mod_gzip_item_include mime ^httpd/unix-directory$

mod_gzip_item_include handler ^server-status$

mod_gzip_item_include handler ^server-info$

mod_gzip_item_include mime ^application/x-httpd-php

mod_gzip_item_include file \.php$

mod_gzip_item_include file \.php3$

mod_gzip_item_include file \.mht$

mod_gzip_item_exclude file \.ico$

mod_gzip_item_exclude file \.css$

mod_gzip_item_exclude file \.js$

mod_gzip_item_exclude mime ^image/.*

mod_gzip_item_exclude reqheader Content-Type:multipart/form-data

mod_gzip_item_exclude reqheader Content-Type:application/x-www-form-urlencoded

mod_gzip_item_exclude file \attachment.php$

mod_gzip_dechunk Yes

mod_gzip_add_header_count Yes





#

# ExtendedStatus controls whether Apache will generate "full" status

# information (ExtendedStatus On) or just basic information (ExtendedStatus

# Off) when the "server-status" handler is called. The default is Off.

#

ExtendedStatus On



### Section 2: 'Main' server configuration

#

# The directives in this section set up the values used by the 'main'

# server, which responds to any requests that aren't handled by a

# definition. These values also provide defaults for

# any containers you may define later in the file.

#

# All of these directives may appear inside containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

#



#

# Port: The port to which the standalone server listens. Certain firewall

# products must be configured before Apache can listen to a specific port.

# Other running httpd servers will also interfere with this port. Disable

# all firewall, security, and other services if you encounter problems.

# To help diagnose problems use the Windows NT command NETSTAT -a

#

Port 8080



#

# ServerAdmin: Your address, where problems with the server should be

# e-mailed. This address appears on some server-generated pages, such

# as error documents.

#

ServerAdmin root@localhost



#

# ServerName allows you to set a host name which is sent back to clients for

# your server if it's different than the one the program would get (i.e., use

# "www" instead of the host's real name).

#

# Note: You cannot just invent host names and hope they work. The name you

# define here must be a valid DNS name for your host. If you don't understand

# this, ask your network administrator.

# If your host doesn't have a registered DNS name, enter its IP address here.

# You will have to access it by its address (e.g., http://123.45.67.89/)

# anyway, and this will make redirections work in a sensible way.

#

# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your

# machine always knows itself by this address. If you use Apache strictly for

# local testing and development, you may use 127.0.0.1 as the server name.

#

ServerName www.zzzz.com





#

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

#

DocumentRoot "/usr/www/html"



#

# Each directory to which Apache has access, can be configured with respect

# to which services and features are allowed and/or disabled in that

# directory (and its subdirectories).

#

# First, we configure the "default" to be a very restrictive set of

# permissions.

#



Options FollowSymLinks

AllowOverride None





#

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something's not working as

# you might expect, make sure that you have specifically enabled it

# below.

#



#

# This should be changed to whatever you set DocumentRoot to.

#





#

# This may also be "None", "All", or any combination of "Indexes",

# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".

#

# Note that "MultiViews" must be named *explicitly* --- "Options All"

# doesn't give it to you.

#

Options Indexes FollowSymLinks MultiViews



#

# This controls which options the .htaccess files in directories can

# override. Can also be "All", or any combination of "Options", "FileInfo",

# "AuthConfig", and "Limit"

#

AllowOverride All



#

# Controls who can get stuff from this server.

#

Order allow,deny

Allow from all







#

# UserDir: The name of the directory which is appended onto a user's home

# directory if a ~user request is received.

#

# Under Win32, we do not currently try to determine the home directory of

# a Windows login, so a format such as that below needs to be used. See

# the UserDir documentation for details.

#

#

# UserDir "/usr/www/users"

#



#

# Control access to UserDir directories. The following is an example

# for a site where these directories are restricted to read-only.

#

#

# AllowOverride FileInfo AuthConfig Limit

# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec

#

# Order allow,deny

# Allow from all

#

#

# Order deny,allow

# Deny from all

#

#



#

# DirectoryIndex: Name of the file or files to use as a pre-written HTML

# directory index. Separate multiple entries with spaces.

#



DirectoryIndex index.html index.htm index.php index.php3 index.phtml





#

# AccessFileName: The name of the file to look for in each directory

# for access control information.

#

AccessFileName .htaccess



#

# The following lines prevent .htaccess files from being viewed by

# Web clients. Since .htaccess files often contain authorization

# information, access is disallowed for security reasons. Comment

# these lines out if you want Web visitors to see the contents of

# .htaccess files. If you change the AccessFileName directive above,

# be sure to make the corresponding changes here.

#

# Also, folks tend to use names such as .htpasswd for password

# files, so this will protect those as well.

#



Order allow,deny

Deny from all

Satisfy All





#

# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each

# document that was negotiated on the basis of content. This asks proxy

# servers not to cache the document. Uncommenting the following line disables

# this behavior, and proxies will be allowed to cache the documents.

#

#CacheNegotiatedDocs



#

# UseCanonicalName: (new for 1.3) With this setting turned on, whenever

# Apache needs to construct a self-referencing URL (a URL that refers back

# to the server the response is coming from) it will use ServerName and

# Port to form a "canonical" name. With this setting off, Apache will

# use the hostname:port that the client supplied, when possible. This

# also affects SERVER_NAME and SERVER_PORT in CGI scripts.

#

UseCanonicalName On



#

# TypesConfig describes where the mime.types file (or equivalent) is

# to be found.

#



TypesConfig conf/mime.types





#

# DefaultType is the default MIME type the server will use for a document

# if it cannot otherwise determine one, such as from filename extensions.

# If your server contains mostly text or HTML documents, "text/plain" is

# a good value. If most of your content is binary, such as applications

# or images, you may want to use "application/octet-stream" instead to

# keep browsers from trying to display binary files as though they are

# text.

#

DefaultType text/plain



#

# The mod_mime_magic module allows the server to use various hints from the

# contents of the file itself to determine its type. The MIMEMagicFile

# directive tells the module where the hint definitions are located.

# mod_mime_magic is not part of the default server (you have to add

# it yourself with a LoadModule [see the DSO paragraph in the 'Global

# Environment' section], or recompile the server and include mod_mime_magic

# as part of the configuration), so it's enclosed in an container.

# This means that the MIMEMagicFile directive will only be processed if the

# module is part of the server.

#



MIMEMagicFile conf/magic





#

# HostnameLookups: Log the names of clients or just their IP addresses

# e.g., www.apache.org (on) or 204.62.129.132 (off).

# The default is off because it'd be overall better for the net if people

# had to knowingly turn this feature on, since enabling it means that

# each client request will result in AT LEAST one lookup request to the

# nameserver.

#

HostnameLookups Off



#

# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a

# container, error messages relating to that virtual host will be

# logged here. If you *do* define an error logfile for a

# container, that host's errors will be logged there and not here.

#

ErrorLog nul



#

# LogLevel: Control the number of messages logged to the error.log.

# Possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

#

LogLevel error



#

# The following directives define some format nicknames for use with

# a CustomLog directive (see below).

#

LogFormat "%h %l %u %t \"%V %r\" %
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined

LogFormat "%h %l %u %t \"%r\" %>s %b" common

LogFormat "%{Referer}i -> %U" referer

LogFormat "%{User-agent}i" agent



#

# The location and format of the access logfile (Common Logfile Format).

# If you do not define any access logfiles within a

# container, they will be logged here. Contrariwise, if you *do*

# define per- access logfiles, transactions will be

# logged therein and *not* in this file.

#



# mod_gzip 输出的日志

CustomLog nul gzip



#

# If you would like to have agent and referer logfiles, uncomment the

# following directives.

#

#CustomLog logs/referer.log referer

#CustomLog logs/agent.log agent



#

# If you prefer a single logfile with access, agent, and referer information

# (Combined Logfile Format) you can use the following directive.

#

#CustomLog logs/access.log combined



#

# Optionally add a line containing the server version and virtual host

# name to server-generated pages (error documents, FTP directory listings,

# mod_status and mod_info output etc., but not CGI generated documents).

# Set to "EMail" to also include a mailto: link to the ServerAdmin.

# Set to one of: On | Off | EMail

#

ServerSignature On



#

# Apache parses all CGI scripts for the shebang line by default.

# This comment line, the first line of the script, consists of the symbols

# pound (#) and exclamation (!) followed by the path of the program that

# can execute this specific script. For a perl script, with perl.exe in

# the C:\Program Files\Perl directory, the shebang line should be:



#!/usr/bin/perl



# Note you _must_not_ indent the actual shebang line, and it must be the

# first line of the file. Of course, CGI processing must be enabled by

# the appropriate ScriptAlias or Options ExecCGI directives for the files

# or directory in question.

#

# However, Apache on Windows allows either the Unix behavior above, or can

# use the Registry to match files by extention. The command to execute

# a file of this type is retrieved from the registry by the same method as

# the Windows Explorer would use to handle double-clicking on a file.

# These script actions can be configured from the Windows Explorer View menu,

# 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit

# button allows you to modify the Actions, of which Apache 1.3 attempts to

# perform the 'Open' Action, and failing that it will try the shebang line.

# This behavior is subject to change in Apache release 2.0.

#

# Each mechanism has it's own specific security weaknesses, from the means

# to run a program you didn't intend the website owner to invoke, and the

# best method is a matter of great debate.

#

# To enable the this Windows specific behavior (and therefore -disable- the

# equivilant Unix behavior), uncomment the following directive:

#

#ScriptInterpreterSource registry

#

# The directive above can be placed in individual blocks or the

# .htaccess file, with either the 'registry' (Windows behavior) or 'script'

# (Unix behavior) option, and will override this server default option.

#



#

# Aliases: Add here as many aliases as you need (with no limit). The format is

# Alias fakename realname

#





#

# Note that if you include a trailing / on fakename then the server will

# require it to be present in the URL. So "/icons" isn't aliased in this

# example, only "/icons/". If the fakename is slash-terminated, then the

# realname must also be slash terminated, and if the fakename omits the

# trailing slash, the realname must also omit it.

#

Alias /icons/ "/usr/local/apache/icons/"





Options Indexes MultiViews

AllowOverride None

Order allow,deny

Allow from all





#

# ScriptAlias: This controls which directories contain server scripts.

# ScriptAliases are essentially the same as Aliases, except that

# documents in the realname directory are treated as applications and

# run by the server when requested rather than as documents sent to the client.

# The same rules about trailing "/" apply to ScriptAlias directives as to

# Alias.

#

ScriptAlias /cgi-bin/ "/usr/www/cgi-bin/"



#

# "C:/Apache/cgi-bin" should be changed to whatever your ScriptAliased

# CGI directory exists, if you have that configured.

#



Options FollowSymLinks ExecCGI

AllowOverride None

Order allow,deny

Allow from all







# End of aliases.



#

# Redirect allows you to tell clients about documents which used to exist in

# your server's namespace, but do not anymore. This allows you to tell the

# clients where to look for the relocated document.

# Format: Redirect old-URI new-URL

#



#

# Directives controlling the display of server-generated directory listings.

#





#

# FancyIndexing is whether you want fancy directory indexing or standard

#

# Note, add the option TrackModified to the IndexOptions default list only

# if all indexed directories reside on NTFS volumes. The TrackModified flag

# will report the Last-Modified date to assist caches and proxies to properly

# track directory changes, but it does _not_ work on FAT volumes.

#

IndexOptions FancyIndexing



#

# AddIcon* directives tell the server which icon to show for different

# files or filename extensions. These are only displayed for

# FancyIndexed directories.

#

AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip



AddIconByType (TXT,/icons/text.gif) text/*

AddIconByType (IMG,/icons/image2.gif) image/*

AddIconByType (SND,/icons/sound2.gif) audio/*

AddIconByType (VID,/icons/movie.gif) video/*



AddIcon /icons/binary.gif .bin .exe

AddIcon /icons/binhex.gif .hqx

AddIcon /icons/tar.gif .tar

AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv

AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip

AddIcon /icons/a.gif .ps .ai .eps

AddIcon /icons/layout.gif .html .shtml .htm .pdf

AddIcon /icons/text.gif .txt

AddIcon /icons/c.gif .c

AddIcon /icons/p.gif .pl .py

AddIcon /icons/f.gif .for

AddIcon /icons/dvi.gif .dvi

AddIcon /icons/uuencoded.gif .uu

AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl

AddIcon /icons/tex.gif .tex

AddIcon /icons/bomb.gif core



AddIcon /icons/back.gif ..

AddIcon /icons/hand.right.gif README

AddIcon /icons/folder.gif ^^DIRECTORY^^

AddIcon /icons/blank.gif ^^BLANKICON^^



#

# DefaultIcon is which icon to show for files which do not have an icon

# explicitly set.

#

DefaultIcon /icons/unknown.gif



#

# AddDescription allows you to place a short description after a file in

# server-generated indexes. These are only displayed for FancyIndexed

# directories.

# Format: AddDescription "description" filename

#

#AddDescription "GZIP compressed document" .gz

#AddDescription "tar archive" .tar

#AddDescription "GZIP compressed tar archive" .tgz



#

# ReadmeName is the name of the README file the server will look for by

# default, and append to directory listings.

#

# HeaderName is the name of a file which should be prepended to

# directory indexes.

#

ReadmeName README

HeaderName HEADER



#

# IndexIgnore is a set of filenames which directory indexing should ignore

# and not include in the listing. Shell-style wildcarding is permitted.

#

IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t





# End of indexing directives.



#

# Document types.

#





#

# AddType allows you to tweak mime.types without actually editing it, or to

# make certain files to be certain types.

#

AddType application/x-tar .tgz



#

# AddEncoding allows you to have certain browsers uncompress

# information on the fly. Note: Not all browsers support this.

# Despite the name similarity, the following Add* directives have nothing

# to do with the FancyIndexing customization directives above.

#

AddEncoding x-compress .Z

AddEncoding x-gzip .gz .tgz

#

# If the AddEncoding directives above are commented-out, then you

# probably should define those extensions to indicate media types:

#

#AddType application/x-compress .Z

#AddType application/x-gzip .gz .tgz



#

# AddLanguage allows you to specify the language of a document. You can

# then use content negotiation to give a browser a file in a language

# it can understand.

#

# Note 1: The suffix does not have to be the same as the language

# keyword --- those with documents in Polish (whose net-standard

# language code is pl) may wish to use "AddLanguage pl .po" to

# avoid the ambiguity with the common suffix for perl scripts.

#

# Note 2: The example entries below illustrate that in quite

# some cases the two character 'Language' abbreviation is not

# identical to the two character 'Country' code for its country,

# E.g. 'Danmark/dk' versus 'Danish/da'.

#

# Note 3: In the case of 'ltz' we violate the RFC by using a three char

# specifier. But there is 'work in progress' to fix this and get

# the reference data for rfc1766 cleaned up.

#

# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)

# French (fr) - German (de) - Greek-Modern (el)

# Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)

# Portugese (pt) - Luxembourgeois* (ltz)

# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)

# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)

# Russian (ru)

#

AddLanguage da .dk

AddLanguage nl .nl

AddLanguage en .en

AddLanguage et .ee

AddLanguage fr .fr

AddLanguage de .de

AddLanguage el .el

AddLanguage he .he

AddCharset ISO-8859-8 .iso8859-8

AddLanguage it .it

AddLanguage ja .ja

AddCharset ISO-2022-JP .jis

AddLanguage kr .kr

AddCharset ISO-2022-KR .iso-kr

AddLanguage nn .nn

AddLanguage no .no

AddLanguage pl .po

AddCharset ISO-8859-2 .iso-pl

AddLanguage pt .pt

AddLanguage pt-br .pt-br

AddLanguage ltz .lu

AddLanguage ca .ca

AddLanguage es .es

AddLanguage sv .sv

AddLanguage cs .cz .cs

AddLanguage ru .ru

AddLanguage zh-CN .zh-cn .cn

AddLanguage zh-TW .zh-tw

AddCharset GB2312 .GB2312 .gb2312

AddCharset Big5 .Big5 .big5

AddCharset WINDOWS-1251 .cp-1251

AddCharset CP866 .cp866

AddCharset ISO-8859-5 .iso-ru

AddCharset KOI8-R .koi8-r

AddCharset UCS-2 .ucs2

AddCharset UCS-4 .ucs4

AddCharset UTF-8 .utf8



# LanguagePriority allows you to give precedence to some languages

# in case of a tie during content negotiation.

#

# Just list the languages in decreasing order of preference. We have

# more or less alphabetized them here. You probably want to change this.

#



LanguagePriority cn en tw da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv





AddType application/x-httpd-php .php

AddType application/x-httpd-php .php3

AddType application/x-httpd-php .phtml

AddType application/x-httpd-php-source .phps



#

# AddHandler allows you to map certain file extensions to "handlers",

# actions unrelated to filetype. These can be either built into the server

# or added with the Action command (see below)

#

# If you want to use server side includes, or CGI outside

# ScriptAliased directories, uncomment the following lines.

#

# To use CGI scripts:

#

AddHandler cgi-script .cgi .pl



#

# To use server-parsed HTML files

#

AddType text/html .shtml

AddHandler server-parsed .shtml



#

# Uncomment the following line to enable Apache's send-asis HTTP file

# feature

#

#AddHandler send-as-is asis



#

# If you wish to use server-parsed imagemap files, use

#

#AddHandler imap-file map



#

# To enable type maps, you might want to use

#

#AddHandler type-map var





# End of document types.



#

# Action lets you define media types that will execute a script whenever

# a matching file is called. This eliminates the need for repeated URL

# pathnames for oft-used CGI file processors.

# Format: Action media/type /cgi-script/location

# Format: Action handler-name /cgi-script/location

#



#

# MetaDir: specifies the name of the directory in which Apache can find

# meta information files. These files contain additional HTTP headers

# to include when sending the document

#

#MetaDir .web



#

# MetaSuffix: specifies the file name suffix for the file containing the

# meta information.

#

#MetaSuffix .meta



#

# Customizable error response (Apache style)

# these come in three flavors

#

# 1) plain text

#ErrorDocument 500 "The server made a boo boo.

# n.b. the single leading (") marks it as text, it does not get output

#

# 2) local redirects

#ErrorDocument 404 /missing.html

# to redirect to local URL /missing.html

#ErrorDocument 404 /cgi-bin/missing_handler.pl

# N.B.: You can redirect to a script or a document using server-side-includes.

#

# 3) external redirects

#ErrorDocument 402 http://some.other-server.com/subscription_info.html

# N.B.: Many of the environment variables associated with the original

# request will *not* be available to such a script.



#

# Customize behaviour based on the browser

#





#

# The following directives modify normal HTTP response behavior.

# The first directive disables keepalive for Netscape 2.x and browsers that

# spoof it. There are known problems with these browser implementations.

# The second directive is for Microsoft Internet Explorer 4.0b2

# which has a broken HTTP/1.1 implementation and does not properly

# support keepalive when it is used on 301 or 302 (redirect) responses.

#

BrowserMatch "Mozilla/2" nokeepalive

BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0



#

# The following directive disables HTTP/1.1 responses to browsers which

# are in violation of the HTTP/1.0 spec by not being able to grok a

# basic 1.1 response.

#

BrowserMatch "RealPlayer 4\.0" force-response-1.0

BrowserMatch "Java/1\.0" force-response-1.0

BrowserMatch "JDK/1\.0" force-response-1.0





# End of browser customization directives



#

# Allow server status reports, with the URL of http://servername/server-status

# Change the "apples.com" to match your domain to enable.

#



SetHandler server-status

Order deny,allow

# Deny from all

Allow from all





#

# Allow remote server configuration reports, with the URL of

# http://servername/server-info (requires that mod_info.c be loaded).

# Change the "apples.com" to match your domain to enable.

#



SetHandler server-info

Order deny,allow

# Deny from all

Allow from all





#

# There have been reports of people trying to abuse an old bug from pre-1.1

# days. This bug involved a CGI script distributed as a part of Apache.

# By uncommenting these lines you can redirect these attacks to a logging

# script on phf.apache.org. Or, you can record them yourself, using the script

# support/phf_abuse_log.cgi.

#

#

# Deny from all

# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi

#



#

# Proxy Server directives. Uncomment the following lines to

# enable the proxy server:

#

#

# ProxyRequests On



#

# Order deny,allow

# Deny from all

# Allow from apples.com

#



#

# Enable/disable the handling of HTTP/1.1 "Via:" headers.

# ("Full" adds the server version; "Block" removes all outgoing Via: headers)

# Set to one of: Off | On | Full | Block

#

# ProxyVia On



#

# To enable the cache as well, edit and uncomment the following lines:

# (no cacheing without CacheRoot)

#

# CacheRoot "/usr/local/proxy"

# CacheSize 5

# CacheGcInterval 4

# CacheMaxExpire 24

# CacheLastModifiedFactor 0.1

# CacheDefaultExpire 1

# NoCache a-domain.com another-domain.edu joes.garage-sale.com



#

# End of proxy directives.



### Section 3: Virtual Hosts

#

# VirtualHost: If you want to maintain multiple domains/hostnames on your

# machine you can setup VirtualHost containers for them. Most configurations

# use only name-based virtual hosts so the server doesn't need to worry about

# IP addresses. This is indicated by the asterisks in the directives below.

#

# Please see the documentation at http://www.apache.org/docs/vhosts/>

# for further details before you try to setup virtual hosts.

#

# You may use the command line option '-S' to verify your virtual host

# configuration.



#

# Use name-based virtual hosting.

#

NameVirtualHost ip地址:8080



#

# VirtualHost example:

# Almost any Apache directive may go into a VirtualHost container.

# The first VirtualHost section is used for requests without a known

# server name.

#



ServerAdmin zzzz@126.com

DocumentRoot /usr/www/html

ServerName "wwww.zzzz.com"

ErrorLog logs/www.zzzzz.net_error.log

CustomLog logs/www.zzzzzz.net_access.log gzip